esp8266 wroom-02 Breakout
author: ChuckL
2 layer board of 1.02 x 1.15 inches (25.9 x 29.2 mm)
Uploaded:
February 23, 2016
Shared:
April 17, 2016
Total Price:
$5.85
Breakout board for the wroom-02. All pins are tied directly to their corresponding pad.
Short en to have the enable pin tied to power.
Add 10k resistors R1, R2, R3 to make the module go into flash boot mode on startup.
Add the KMR221GLFS switch so you can easily put the module into flash mode.
Breakout board for the wroom-02. All pins are tied directly to their corresponding pad.
Short en to have the enable pin tied to power.
Add 10k resistors R1, R2, R3 to make the module go into flash boot mode on startup.
Add the KMR221GLFS switch so you can easily put the module into flash mode.
