ATMEGA328P-PU programming board
author: mithat
2 layer board of 2.51 x 2.11 inches (63.6 x 53.5 mm)
Uploaded:
October 28, 2017
Shared:
November 01, 2017
Total Price:
$26.35
Description
Use for bulk programming of ATMEGA328P-PU chips preloaded with the Arduino bootloader. Requires an appropriate USB to serial converter like SparkFun’s FTDI Basic Breakout or Basic Breakout SparkFun Serial Basic Breakout - CH340G. An untested ICSP port is also provided.
BOM
| quant | designators | part |
|---|---|---|
| 3 | C1 C3 C4 | 0.1u 50V ceramic (Vishay K104K15X7RF5TL2) |
| 1 | C2 | 47u/6.3V electrolytic (Nichicon UMV0J470MFD1TP) |
| 1 | D1 | Any 3mm LED |
| 1 | P2 | 6 position 0.1" angled breakaway header |
| 1 | P1 | 2x3 0.1" male header |
| 1 | R1 | Any 10K 1/4W resistor |
| 1 | R2 | Any 470 ohm 1/4W resistor |
| 1 | SW1 | Apem MJTP1250 |
| 1 | U1 | 28 pin ZIF socket with 0.3” row spacing (SparkFun PRT-09175) |
| 1 | X1 | Murata CSTLS16M0X53-B0 |
Misc.
Provided free for use without any claim(s) of suitability for any purpose. Use at your own risk.
Copyright © 2017 Mithat Konar. All rights reserved.
Description
Use for bulk programming of ATMEGA328P-PU chips preloaded with the Arduino bootloader. Requires an appropriate USB to serial converter like SparkFun’s FTDI Basic Breakout or Basic Breakout SparkFun Serial Basic Breakout - CH340G. An untested ICSP port is also provided.
BOM
| quant | designators | part |
|---|---|---|
| 3 | C1 C3 C4 | 0.1u 50V ceramic (Vishay K104K15X7RF5TL2) |
| 1 | C2 | 47u/6.3V electrolytic (Nichicon UMV0J470MFD1TP) |
| 1 | D1 | Any 3mm LED |
| 1 | P2 | 6 position 0.1" angled breakaway header |
| 1 | P1 | 2x3 0.1" male header |
| 1 | R1 | Any 10K 1/4W resistor |
| 1 | R2 | Any 470 ohm 1/4W resistor |
| 1 | SW1 | Apem MJTP1250 |
| 1 | U1 | 28 pin ZIF socket with 0.3” row spacing (SparkFun PRT-09175) |
| 1 | X1 | Murata CSTLS16M0X53-B0 |
Misc.
Provided free for use without any claim(s) of suitability for any purpose. Use at your own risk.
Copyright © 2017 Mithat Konar. All rights reserved.
