2 layer board of 0.68 x 0.68 inches (17.4 x 17.4 mm)
Uploaded:
October 23rd 2014
Shared:
October 23rd 2014
Total Price:
$2.30
Open source direct driver LED driver populated with most parts off a standard 105c. See post #1360 in this thread (ht…
Open source direct driver LED driver populated with most parts off a standard 105c. See post #1360 in this thread (http://budgetlightforum.com/node/29562)
D1 is SOT-323
C1 is 10uf 0805 X7R
OTC is 1uf (for off time based FW)
R1 & R2 is the voltage divider (0805’s)
D1 = SOD-323 (pad is R3 0805 if zener modded)
Z1 is SOD-123 4.3v zener (only populate if needed)
FET is D2PAK such as AOD510 or (the no longer available Vishay 70N02)
Open source direct driver LED driver populated with most parts off a standard 105c. See post #1360 in this thread (ht…
Open source direct driver LED driver populated with most parts off a standard 105c. See post #1360 in this thread (http://budgetlightforum.com/node/29562)
D1 is SOT-323
C1 is 10uf 0805 X7R
OTC is 1uf (for off time based FW)
R1 & R2 is the voltage divider (0805’s)
D1 = SOD-323 (pad is R3 0805 if zener modded)
Z1 is SOD-123 4.3v zener (only populate if needed)
FET is D2PAK such as AOD510 or (the no longer available Vishay 70N02)
Hey there! Before ordering, make sure you have all all the info you need to complete and use this design.
This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended.
OSH Park cannot place any guarantees about the functionality or correctness of the design.
