Gerber_PCB_eTH01 copy_2022-02-01
author: e_mccarron
2 layer board of 1.82 x 1.10 inches (46.2 x 28.0 mm)
Uploaded:
February 02, 2022
Shared:
February 02, 2022
Total Price:
$10.00
Pixel Interface for WT32-ETH01 module. Designed for 12v pixels. Fuse holder is Keystone 3568. Level Shifter is 74HCT125. R1 = 200ohm. Caps, whatever you have – think mine were 22uf for the large cap, and a few pf for the small bypass cap. Jumpers are 3.5mm pitch. U4 is buck regulator – https://www.amazon.com/dp/B098F6B7X5
I’ve been getting some bad regulators recently – be sure to check it works (and cut that damn adj jumper, and solder the 5v jumper…)
Pixel Interface for WT32-ETH01 module. Designed for 12v pixels. Fuse holder is Keystone 3568. Level Shifter is 74HCT125. R1 = 200ohm. Caps, whatever you have – think mine were 22uf for the large cap, and a few pf for the small bypass cap. Jumpers are 3.5mm pitch. U4 is buck regulator – https://www.amazon.com/dp/B098F6B7X5
I’ve been getting some bad regulators recently – be sure to check it works (and cut that damn adj jumper, and solder the 5v jumper…)
