IBT2_Booster
author: BKB
2 layer board of 1.96 x 1.96 inches (49.8 x 49.7 mm)
Uploaded:
July 03, 2018
Shared:
July 03, 2018
Total Price:
$19.15
Interface for DCC Booster with IBT2 You can use wired or smd 0805 Parts. Partlist : IC1=7805; Ok1=6N137; D1=1N4148; D2=1N4001; Heatsink SK13/35 wired parts: C1, C2, C3= 100n/25V RM2,5; Led1= 3mm; R1, R3= 1k5 0207; R2, R4= 390R 0207; R5= 560R 0207; T1= BC547 or smd-parts 0805 C11, C12, C13= 100n/25V; Led11; R11, R13=1k5; R12, R14= 390R; R15= 560R; T2= BC846 X1 to power of IBT2; X2 to trackline of digital control; X3 Jumper for enable (emergency stopp switch or opto) if you connect an opto to X3: X3-1 is collector; X3-2 is emitter of the transistor No software needed.
Interface for DCC Booster with IBT2 You can use wired or smd 0805 Parts. Partlist : IC1=7805; Ok1=6N137; D1=1N4148; D2=1N4001; Heatsink SK13/35 wired parts: C1, C2, C3= 100n/25V RM2,5; Led1= 3mm; R1, R3= 1k5 0207; R2, R4= 390R 0207; R5= 560R 0207; T1= BC547 or smd-parts 0805 C11, C12, C13= 100n/25V; Led11; R11, R13=1k5; R12, R14= 390R; R15= 560R; T2= BC846 X1 to power of IBT2; X2 to trackline of digital control; X3 Jumper for enable (emergency stopp switch or opto) if you connect an opto to X3: X3-1 is collector; X3-2 is emitter of the transistor No software needed.
