spwmv3 supplemental pot onboard
author: HolyFockBoxMods
2 layer board of 2.18 x 0.60 inches (55.3 x 15.3 mm)
Uploaded:
January 21, 2019
Shared:
January 21, 2019
Total Price:
$6.50
Supplemental board for sPWM v3.
What you need: -Omron B3SL-1002P or similar tac switch or external switch of your choice -11 male pin headers, 2.54mm pitch -Model 93 pot (for onboard use) or 2 switches of your choice for the pot wiring -LED or 3-wire VM -6mm Standoffs -screws of appropriate size (i.e. M1.6) -sPWM v3
The sPWM is sandwiched between this PCB and the enclosure wall, with the mosfet facing the enclosure. Board has a cutout to solder the power wires directly to the sPWM.
Supplemental board for sPWM v3.
What you need: -Omron B3SL-1002P or similar tac switch or external switch of your choice -11 male pin headers, 2.54mm pitch -Model 93 pot (for onboard use) or 2 switches of your choice for the pot wiring -LED or 3-wire VM -6mm Standoffs -screws of appropriate size (i.e. M1.6) -sPWM v3
The sPWM is sandwiched between this PCB and the enclosure wall, with the mosfet facing the enclosure. Board has a cutout to solder the power wires directly to the sPWM.
