Touch Pixel v2

By TreySch

2 layer board of 3.20 x 2.79 inches (81.3 x 70.9 mm).
Shared on May 13th, 2017 01:51

This is the PCB used to help funding for the Touch Screen Exhibit. Required parts: APA102C - 3; 1x17 Fml Hdr - 2; 10M Resistor (1206in) - 3; Potentiometer - 1; Power Slide Switch - 1; SP3D Slide - 1. This design uses the Pololu A-Star Micro (#3101) with surface mount header pins, except for MOSI and SCK


Touch Pixel v2

By TreySch

2 layer board of 3.20 x 2.79 inches (81.3 x 70.9 mm).
Shared on May 13th, 2017 01:51

This is the PCB used to help funding for the Touch Screen Exhibit. Required parts: APA102C - 3; 1x17 Fml Hdr - 2; 10M Resistor (1206in) - 3; Potentiometer - 1; Power Slide Switch - 1; SP3D Slide - 1. This design uses the Pololu A-Star Micro (#3101) with surface mount header pins, except for MOSI and SCK