Attiny10 Programming Board
author: SanchoC
2 layer board of 0.79 x 0.79 inches (20.1 x 20.1 mm)
Uploaded:
March 14, 2019
Shared:
March 14, 2019
Total Price:
$3.10
Attiny10 Programming Board is a tiny board for programming Attiny10 MCU into two programming modes. The slide swith (SW1) controls programming modes. The upper position of the switch is a high voltage (12V) serial programming mode. The downer position of the switch is a TPI programming mode. You can use the high voltage serial programming for RSTDISBL fuse resetting.
AVRDude parameters for fuse resetting: avrdude -p t10 -c USBasp -P USB -x section_config -e
TESTED with USBAsp
BOM:
| Label | Name | Value | Footprint |
|---|---|---|---|
| C1,C2 | smd ceramic capacitor | 22uF | 1206 |
| C3 | smd ceramic capacitor | 0.1uF | 0603 |
| R1 | smd resistor | 19.1k | 0603 (1%) |
| R2 | smd resistor | 1k | 0603 (1%) |
| R3 | smd resistor | 1k | 0603 |
| R4 | smd resistor | 20k | 0603 |
| Q1 | smd P-channel mosfet | SOT-23 | |
| D1 | smd diode 1N5819W | SOD-123 | |
| L1 | smd inductor | 22uH | 5x5mm |
| U1 | Attiny10 | SOT-26 | |
| U2 | MT3608 | SOT-26 | |
| PWR | smd led | 0603 | |
| SW1 | smd slide switch | MSK-01 |
Attiny10 Programming Board is a tiny board for programming Attiny10 MCU into two programming modes. The slide swith (SW1) controls programming modes. The upper position of the switch is a high voltage (12V) serial programming mode. The downer position of the switch is a TPI programming mode. You can use the high voltage serial programming for RSTDISBL fuse resetting.
AVRDude parameters for fuse resetting: avrdude -p t10 -c USBasp -P USB -x section_config -e
TESTED with USBAsp
BOM:
| Label | Name | Value | Footprint |
|---|---|---|---|
| C1,C2 | smd ceramic capacitor | 22uF | 1206 |
| C3 | smd ceramic capacitor | 0.1uF | 0603 |
| R1 | smd resistor | 19.1k | 0603 (1%) |
| R2 | smd resistor | 1k | 0603 (1%) |
| R3 | smd resistor | 1k | 0603 |
| R4 | smd resistor | 20k | 0603 |
| Q1 | smd P-channel mosfet | SOT-23 | |
| D1 | smd diode 1N5819W | SOD-123 | |
| L1 | smd inductor | 22uH | 5x5mm |
| U1 | Attiny10 | SOT-26 | |
| U2 | MT3608 | SOT-26 | |
| PWR | smd led | 0603 | |
| SW1 | smd slide switch | MSK-01 |
