afromini quad brushed esc
author: KoekieMonster
2 layer board of 0.60 x 0.31 inches (15.3 x 8.0 mm)
Uploaded:
January 07, 2015
Shared:
January 07, 2015
Total Price:
$0.90
afromini quad quadcopter brushed esc ONLY WORKS WITH REV 0 or REV 1. NOT WITH REV 3. if you need this for revision 3 please send a PM to KoekieMonster @ rcgroups.com, then I’ll draw it.
Bottom: 4x 1206 10k resistor (or 4k7, 2k2 will probably work as well)
Top: 4x FET SOT-23 (I’ve used these: http://www.reichelt.nl/Transistors-IRL-IRFZ-/IRLML-6244/3//index.html?ACTION=3&GROUPID=2896&ARTICLE=132145&OFFSET=16&)
For it to work you need to solder male headers on this board and the afromini and connect the 2. the lipo can be soldered to the + / - pads on the left. connect the + of every motor to the+ of the lipo and the - of every motor to the right FET output (see board layout text)
afromini quad quadcopter brushed esc ONLY WORKS WITH REV 0 or REV 1. NOT WITH REV 3. if you need this for revision 3 please send a PM to KoekieMonster @ rcgroups.com, then I’ll draw it.
Bottom: 4x 1206 10k resistor (or 4k7, 2k2 will probably work as well)
Top: 4x FET SOT-23 (I’ve used these: http://www.reichelt.nl/Transistors-IRL-IRFZ-/IRLML-6244/3//index.html?ACTION=3&GROUPID=2896&ARTICLE=132145&OFFSET=16&)
For it to work you need to solder male headers on this board and the afromini and connect the 2. the lipo can be soldered to the + / - pads on the left. connect the + of every motor to the+ of the lipo and the - of every motor to the right FET output (see board layout text)
