TI 20pin 50mil JTAG SMD adapter V1.0d
author: esden
2 layer board of 0.31 x 0.51 inches (7.9 x 12.8 mm)
Uploaded:
June 15, 2017
Shared:
June 16, 2017
Total Price:
$0.75
An SMD adapter converting the proprietary TI 20pin header (found on many of the Beagle Bone boards including the Beagle Bone Black) to a standard ARM Cortex 10pin debug connector, found on the Black Magic Probe and many other JTAG/SWD devices.
Recommended to be manufactured as a 0.8mm thickness PCB.
BOM:
- 0402 1k Ohm Resistor
- FTSH-105-01-F-DV-K 10pin 0.05" pitch connector
This adapter board design is part of the 1BitSquared adapter collection.
An SMD adapter converting the proprietary TI 20pin header (found on many of the Beagle Bone boards including the Beagle Bone Black) to a standard ARM Cortex 10pin debug connector, found on the Black Magic Probe and many other JTAG/SWD devices.
Recommended to be manufactured as a 0.8mm thickness PCB.
BOM:
- 0402 1k Ohm Resistor
- FTSH-105-01-F-DV-K 10pin 0.05" pitch connector
This adapter board design is part of the 1BitSquared adapter collection.
