Pulse Generator r3
author: rfmerrill
2 layer board of 1.10 x 1.07 inches (28.0 x 27.2 mm)
Uploaded:
March 13th 2021
Shared:
May 8th 2021
Total Price:
$5.90
using AUC logic and smaller components
C2: 0.047u for ~3.5 kHz, 1u for ~170 Hz
C1, C3-C9: 10u
R1: 6.8kohm
R2-R6: 220 ohm, lowest inductance possible (ERA-1AEB221C used – 0201)
U1: 74AHC1G14GW,125
U2-U7: SN74AUC1G17DCKR
In my build I added a 220uF electrolytic at the power input and added additional 0805 bypass caps directly across the power and ground of each gate (actually power and NC pin, as that is grounded).
using AUC logic and smaller components
C2: 0.047u for ~3.5 kHz, 1u for ~170 Hz
C1, C3-C9: 10u
R1: 6.8kohm
R2-R6: 220 ohm, lowest inductance possible (ERA-1AEB221C used – 0201)
U1: 74AHC1G14GW,125
U2-U7: SN74AUC1G17DCKR
In my build I added a 220uF electrolytic at the power input and added additional 0805 bypass caps directly across the power and ground of each gate (actually power and NC pin, as that is grounded).