Dreamcast 480p XRGB-mini Framemeister / OSSC Cable
author: ziggy
2 layer board of 1.99 x 1.00 inches (50.5 x 25.4 mm)
Uploaded:
March 03, 2018
Shared:
March 04, 2018
Total Price:
$9.90
Tested with Framemeister and found to be working. I’ve read that this is also compatible with the OSSC. Use at your own risk.
http://dcemulation.org/?title=Dreamcast_480p_XRGB-mini_Framemeister_Cable
All the info you need is in the above link. The only additions I made are C6 decoupling capacitor (0.1µF) and JP1 (wire to SPST switch to select between 240p/480i and 480p modes). You can jump pin 6 inside the AV connector if that’s easier (one less conductor needed). You could also omit pin 7 or connect it to ground inside of the AV connector if you don’t care to switch between resolution modes.
Tested with Framemeister and found to be working. I’ve read that this is also compatible with the OSSC. Use at your own risk.
http://dcemulation.org/?title=Dreamcast_480p_XRGB-mini_Framemeister_Cable
All the info you need is in the above link. The only additions I made are C6 decoupling capacitor (0.1µF) and JP1 (wire to SPST switch to select between 240p/480i and 480p modes). You can jump pin 6 inside the AV connector if that’s easier (one less conductor needed). You could also omit pin 7 or connect it to ground inside of the AV connector if you don’t care to switch between resolution modes.
