Neo GameBoy Printer PCB - Rev 1
author: zenaro147
2 layer board of 2.03 x 2.25 inches (51.7 x 57.2 mm)
Uploaded:
April 21, 2022
Shared:
April 21, 2022
Total Price:
$22.90
First Revision of the PCB to use with my project: https://github.com/zenaro147/NeoGB-Printer
PCB GitHub Page: https://github.com/zenaro147/GBP-ESP32-PCB
BOM List
| Component | Where to buy |
|---|---|
| ESP32 Dev Board (38 pins) | AliExpress |
| OLED Display 128x32 (0.91 inch) | AliExpress |
| SD Card/MicroSD Card Module (Choose only one! I recommend the SD module) | AliExpress - SD Card / AliExpress - MicroSD |
| 4 channel Logical Level Shifter | AliExpress |
| Female Pin Header with 40 pins (you need at least 38 pins, or 2 with 20pins) | AliExpress |
| PushButton 4.5x4.5mm (any height) | AliExpress |
| 5k or 10k resistor | AliExpress |
| MicroUSB Female | AliExpress |
| Charging Module with StepUp (5V) - DD05CVSA (optional) | AliExpress |
| Micro Switch - SS-12D00G3 (optional) | AliExpress |
| 1500mah Li-Po Battery (optional) | AliExpress |
| AGB Link Port Connector (optional) | AliExpress |
| RGB LED 5mm (optional) | AliExpress |
| 220R (if you want the LED) resistor | AliExpress |
First Revision of the PCB to use with my project: https://github.com/zenaro147/NeoGB-Printer
PCB GitHub Page: https://github.com/zenaro147/GBP-ESP32-PCB
BOM List
| Component | Where to buy |
|---|---|
| ESP32 Dev Board (38 pins) | AliExpress |
| OLED Display 128x32 (0.91 inch) | AliExpress |
| SD Card/MicroSD Card Module (Choose only one! I recommend the SD module) | AliExpress - SD Card / AliExpress - MicroSD |
| 4 channel Logical Level Shifter | AliExpress |
| Female Pin Header with 40 pins (you need at least 38 pins, or 2 with 20pins) | AliExpress |
| PushButton 4.5x4.5mm (any height) | AliExpress |
| 5k or 10k resistor | AliExpress |
| MicroUSB Female | AliExpress |
| Charging Module with StepUp (5V) - DD05CVSA (optional) | AliExpress |
| Micro Switch - SS-12D00G3 (optional) | AliExpress |
| 1500mah Li-Po Battery (optional) | AliExpress |
| AGB Link Port Connector (optional) | AliExpress |
| RGB LED 5mm (optional) | AliExpress |
| 220R (if you want the LED) resistor | AliExpress |
