2 layer board of 1.35 x 1.35 inches (34.2 x 34.2 mm)
Uploaded:
March 18th 2014
Shared:
March 18th 2014
Total Price:
$9.05
4 x AA serial battery carrier. Bottom plate. 12 awg solid core wire should fit through the vias. The bottom side of a…
4 x AA serial battery carrier. Bottom plate. 12 awg solid core wire should fit through the vias. The bottom side of all vias really should be covered (kapton, packing tape, epoxy etc). At very least the via for the positive connection must be covered.
4 x AA serial battery carrier. Bottom plate. 12 awg solid core wire should fit through the vias. The bottom side of a…
4 x AA serial battery carrier. Bottom plate. 12 awg solid core wire should fit through the vias. The bottom side of all vias really should be covered (kapton, packing tape, epoxy etc). At very least the via for the positive connection must be covered.
Hey there! Before ordering, make sure you have all all the info you need to complete and use this design.
This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended.
OSH Park cannot place any guarantees about the functionality or correctness of the design.