RKJXT1F42001 Breakout
author: MutableFocus
2 layer board of 1.80 x 0.90 inches (45.8 x 22.9 mm)
Uploaded:
March 10, 2021
Shared:
March 10, 2021
Total Price:
$8.10
Breakout Board for Alps Alpine RKJXT1F42001 Rotary Joystick, with DNL’d PUs/PDs.
I ordered my stock of these units from RS Electronics EU as there were no US distributors with stock at the time. Looks like Mouser has since received stock after I ordered: RKJXT1F42001 @ Mouser
One note on the symbol/footprint available from Mouser, Pin 11 (footprint ref desig D_2, iirc) is for the positioning lug that is molded into the housing on the RJS and has no electrical connection. The datasheet footprint suggests a 1.1mm diameter hole is needed. The footprint I downloaded from Mouser, iirc, provides for a 1.0mm hole. I manually edited the footprint to make it a 1.1mm hole. Will update this if it proves to be not needed, or if other needed changes are discovered after the board gets stuffed.
Breakout Board for Alps Alpine RKJXT1F42001 Rotary Joystick, with DNL’d PUs/PDs.
I ordered my stock of these units from RS Electronics EU as there were no US distributors with stock at the time. Looks like Mouser has since received stock after I ordered: RKJXT1F42001 @ Mouser
One note on the symbol/footprint available from Mouser, Pin 11 (footprint ref desig D_2, iirc) is for the positioning lug that is molded into the housing on the RJS and has no electrical connection. The datasheet footprint suggests a 1.1mm diameter hole is needed. The footprint I downloaded from Mouser, iirc, provides for a 1.0mm hole. I manually edited the footprint to make it a 1.1mm hole. Will update this if it proves to be not needed, or if other needed changes are discovered after the board gets stuffed.
