STM32F030F4P6 breakout board v5

By chris

2 layer board of 1.00 x 0.60 inches (25.4 x 15.3 mm).
Shared on November 9th, 2015 22:37

Minimal breakout board for the STM32F030F4P6

v5: added pull-down to BOOT0 pin, slightly increased silk screen type size, minor changes to routing

BOM:

  • 1 x STM32F030F4P6
  • 2 x 0603 capacitor 100 nF
  • 1 x 0603 capacitor 10 nF
  • 1 x 0603 LED
  • 1 x 0603 resistor 330 Ohm
  • 1 x 0603 resistor 10 kOhm
  • 1 x push button with that funky footprint

Hackaday Project: https://hackaday.io/project/4277-stm32f030f4p6-breakout-board


STM32F030F4P6 breakout board v5

By chris

2 layer board of 1.00 x 0.60 inches (25.4 x 15.3 mm).
Shared on November 9th, 2015 22:37

Minimal breakout board for the STM32F030F4P6

v5: added pull-down to BOOT0 pin, slightly increased silk screen type size, minor changes to routing

BOM:

  • 1 x STM32F030F4P6
  • 2 x 0603 capacitor 100 nF
  • 1 x 0603 capacitor 10 nF
  • 1 x 0603 LED
  • 1 x 0603 resistor 330 Ohm
  • 1 x 0603 resistor 10 kOhm
  • 1 x push button with that funky footprint

Hackaday Project: https://hackaday.io/project/4277-stm32f030f4p6-breakout-board