Boscam 32CH Tx v0.2
author: O_Shovah
2 layer board of 1.20 x 0.75 inches (30.4 x 19.2 mm)
Uploaded:
March 11, 2015
Shared:
March 12, 2015
Total Price:
$4.50
new: C&D tantals, SU or SSU ATTiny, 4-6 pin molex, RC input possible
5.8GHz FPV Transmitter using a Boscam TX5823 module. The molex connector is compatible to FT952. Schematics and code by JReise, for more details see forum post (german) http://fpv-treff.de/viewtopic.php?f=23&t=5974
4,50$/3 Pieces
BOM:
| C1,C2 | 220-470µF | [2312/2917] Tantal Caps (C/D) |
| C3 | 100nF | [0805] Ceramic Cap |
| R1 | 150-300Ohm | [0805] Resistor |
| R2 | 4,7kOhm | [0603] Resistor |
| D1 | [0805] LED | |
| J1 | 4-6 Pins | Molex PicoBlade |
| J2 | (RP-)SMA edge mount connector | |
| S1 | Tactile Switch KMS221G LFS | |
| U1 | Boscam TX5823 | |
| U3 | Pololu D24V6F3 | |
| U4 | ATTiny13-20SU or SSU |
new: C&D tantals, SU or SSU ATTiny, 4-6 pin molex, RC input possible
5.8GHz FPV Transmitter using a Boscam TX5823 module. The molex connector is compatible to FT952. Schematics and code by JReise, for more details see forum post (german) http://fpv-treff.de/viewtopic.php?f=23&t=5974
4,50$/3 Pieces
BOM:
| C1,C2 | 220-470µF | [2312/2917] Tantal Caps (C/D) |
| C3 | 100nF | [0805] Ceramic Cap |
| R1 | 150-300Ohm | [0805] Resistor |
| R2 | 4,7kOhm | [0603] Resistor |
| D1 | [0805] LED | |
| J1 | 4-6 Pins | Molex PicoBlade |
| J2 | (RP-)SMA edge mount connector | |
| S1 | Tactile Switch KMS221G LFS | |
| U1 | Boscam TX5823 | |
| U3 | Pololu D24V6F3 | |
| U4 | ATTiny13-20SU or SSU |
