plcc32 socket to dip32
author: zenxyzzy
2 layer board of 0.73 x 1.63 inches (18.5 x 41.4 mm)
Uploaded:
March 01, 2020
Shared:
March 01, 2020
Total Price:
$5.90
this is an adaptor board for a 32 pin plcc in a socket to dip-32. the best way to construct this is to put the dip pins in first, solder them on the top, clip the pins at the surface, and then place the plcc socket. then solder that on the bottom.
I found some pins, less than 10 cents in reasonable quantity, both from keystone (part 1378-1) and mill-max (3121-2-00-15-00-00-08-0),
that makes it all low profile and work.
this is an adaptor board for a 32 pin plcc in a socket to dip-32. the best way to construct this is to put the dip pins in first, solder them on the top, clip the pins at the surface, and then place the plcc socket. then solder that on the bottom.
I found some pins, less than 10 cents in reasonable quantity, both from keystone (part 1378-1) and mill-max (3121-2-00-15-00-00-08-0),
that makes it all low profile and work.
