Output RCA to Phoenix Adapter for Extron Crosspoints
author: the_remora
2 layer board of 0.64 x 0.79 inches (16.4 x 20.2 mm)
Uploaded:
May 25, 2021
Shared:
May 25, 2021
Total Price:
$2.55
Copyright and Disclaimer
Copyright: René Richard
https://github.com/db-electronics/phoenix-audio-adapter-kicad
This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.
You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions
Phoenix Audio Adapter
I didn’t want to have a bunch of stripped wire connectors on my Extron Crosspoint 12x4 video switch so I decided to make this simple adapter which allows a stacked RCA stereo audio jack (Digikey# CP-1435-ND) to be interfaced to a standard 5pin 3.5mm Phoenix connector.
Output Differences
The Extron Audio output wiring is different than the input wiring. There are 2 PCBs in this project. Be sure to use the output PCB for your outputs!
Phoenix Adapter
This folder contains a PCB which connects L- and R-. You “can” use this PCB for all your needs, provided you cut the R- and L- traces for outputs. If you forget to cut the traces it’s probably not a big deal since there is internal resistance (50 ohms or so) in line which each output. Obviously best if they are cut, but not catastrophic by any means.
Phoenix Adapter Output
This folder contains a PCB which leaves L- and R- floating.
Copyright and Disclaimer
Copyright: René Richard
https://github.com/db-electronics/phoenix-audio-adapter-kicad
This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.
You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions
Phoenix Audio Adapter
I didn’t want to have a bunch of stripped wire connectors on my Extron Crosspoint 12x4 video switch so I decided to make this simple adapter which allows a stacked RCA stereo audio jack (Digikey# CP-1435-ND) to be interfaced to a standard 5pin 3.5mm Phoenix connector.
Output Differences
The Extron Audio output wiring is different than the input wiring. There are 2 PCBs in this project. Be sure to use the output PCB for your outputs!
Phoenix Adapter
This folder contains a PCB which connects L- and R-. You “can” use this PCB for all your needs, provided you cut the R- and L- traces for outputs. If you forget to cut the traces it’s probably not a big deal since there is internal resistance (50 ohms or so) in line which each output. Obviously best if they are cut, but not catastrophic by any means.
Phoenix Adapter Output
This folder contains a PCB which leaves L- and R- floating.
