THIS VERSION HAS BEEN DEPRECATED. See v1.5 on OSH Park
ESP-01 & ESP-03 Breadboard Breakout
Provides voltage regulation and switches to enter programming mode (over FTDI or serial UART).
Provide a simple-to-use programmer for ESP8266 modules similar to Adafruit Huzzah ESP8266 module.
Solder all components on, including your choice of ESP-01 or ESP-03. Insert UART connection into header at end of board. S1 will reset the board. To program board, hold S2 while hitting S1. S3 will select between 3.3V and 5V input on Vin (towards the ESP module is 5V).
Schematic, BOM, and Ultiboard layout files can be found at the github repo.
U1 can take either castellated SMD pads (ESP-03) or a 2x4 .1" pitch female header (ESP-01).
R1-R4 = 10k 0603, R5 = 1k 0603.
C1&C3 = 10uF 0805, C2 = 0.1uF 0603.
LED1 = LTST-C190KFKT Orange 0603 LED.
U2 = LD1117AS33 3.3V 1A Voltage Regulator.
S1-S2 = KMR221NG LFS pushbutton momentary SPST switch. S3 = PCM12SM SPDT slide switch.