Eastbots DIO board 2019
author: steve-t
2 layer board of 2.10 x 0.60 inches (53.4 x 15.3 mm)
Uploaded:
January 22, 2019
Shared:
January 22, 2019
Total Price:
$6.35
Eastbots DIO tester/breakout board, 2019 season revision.
based on previous diobd design: Tester and breakout for FRC and similar digital I/O. The 3-pin 1x3 headers each carry Ground, +5v, and Signal, in that order. Build it as a tester, with male and female horizontal socket and header strips. Or omit the male headers, and directly solder in the wires from a limit switch or break-beam sensor. Designed by FRC team 4795.
this rev add silkscreen identifying the three signal pins, and some #2 mounting holes. Silk on the back identifies this as being designed (and potentially fabricated) during the 2019 FRC season.
Eastbots DIO tester/breakout board, 2019 season revision.
based on previous diobd design: Tester and breakout for FRC and similar digital I/O. The 3-pin 1x3 headers each carry Ground, +5v, and Signal, in that order. Build it as a tester, with male and female horizontal socket and header strips. Or omit the male headers, and directly solder in the wires from a limit switch or break-beam sensor. Designed by FRC team 4795.
this rev add silkscreen identifying the three signal pins, and some #2 mounting holes. Silk on the back identifies this as being designed (and potentially fabricated) during the 2019 FRC season.
