Sourdough Boards - Powerdough v1.1

author: PhantomicLabs
Top
Bottom

2 layer board of 2.14 x 1.10 inches (54.4 x 28.0 mm)
Uploaded: August 31, 2019
Shared: August 31, 2019
Total Price: $11.80

Breadboard power feed, and probe point. Power input via 2.1mm DC barrel connector, 3.5mm terminal block, alligator clips, Banana connector, & dupont header, with SMD dupont connector to breadboard.

Warning: UNTESTED, traces rated for 24V at 2A Max. There is no protection in this circuit, only VIN and Ground, so make sure you use a battery or clean PSU to power this board. Polarity is indicated on the top side of the board. This is for a standard solderless breadboards with power bus.

Breadboard power feed, and probe point. Power input via 2.1mm DC barrel connector, 3.5mm terminal block, alligator clips, Banana connector, & dupont header, with SMD dupont connector to breadboard.

Warning: UNTESTED, traces rated for 24V at 2A Max. There is no protection in this circuit, only VIN and Ground, so make sure you use a battery or clean PSU to power this board. Polarity is indicated on the top side of the board. This is for a standard solderless breadboards with power bus.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy