CortexDebug
author: dtfuhf
2 layer board of 1.00 x 1.10 inches (25.5 x 28.0 mm)
Uploaded:
March 25, 2017
Shared:
March 25, 2017
Total Price:
$5.50
20-pin to 10-pin Cortex-M Debug Adapter
compatible with Windows only.
Jumper DBG to the center pin to provide 3v3 to your target from the debugger. Jumper SELF to the middle or leave the jumper off for self-powered targets.
10-pin header is Digikey 1175-1629-ND
20-pin header is Digikey S9197-ND
Place a 0R in the top-right resistor place near KEY to pull down GNDDetect pin.
Place a 0R in either KEY + or - to pull that pin up/down.
20-pin to 10-pin Cortex-M Debug Adapter
compatible with Windows only.
Jumper DBG to the center pin to provide 3v3 to your target from the debugger. Jumper SELF to the middle or leave the jumper off for self-powered targets.
10-pin header is Digikey 1175-1629-ND
20-pin header is Digikey S9197-ND
Place a 0R in the top-right resistor place near KEY to pull down GNDDetect pin.
Place a 0R in either KEY + or - to pull that pin up/down.
