TXQ_Darksaber V2 Hilt PCB V1.1
author: BathaMilkTastesGreat
2 layer board of 0.48 x 0.79 inches (12.1 x 20.1 mm)
Uploaded:
June 21, 2023
Shared:
June 21, 2023
Total Price:
$1.85
Test run of in hilt pcb connectors for the TXQ Darksaber.
This is a basic connector set for a slightly offset chassis cutout. Make sure you have the Darksaber blade from TXQ for proper ability to calculate alignment with this blade pcb if you use it in your chassis design. It is basic, but I’ll most likely go back & add some WS2812-2020 pixels to the pcb in a future design. If you’re building your own blade & want to use this pcb, I will hopefully come out with a bladeside pcb in the future.
Test run of in hilt pcb connectors for the TXQ Darksaber.
This is a basic connector set for a slightly offset chassis cutout. Make sure you have the Darksaber blade from TXQ for proper ability to calculate alignment with this blade pcb if you use it in your chassis design. It is basic, but I’ll most likely go back & add some WS2812-2020 pixels to the pcb in a future design. If you’re building your own blade & want to use this pcb, I will hopefully come out with a bladeside pcb in the future.
