CK's MPU6050 Breakout
author: Cereal_Killer
2 layer board of 1.01 x 0.61 inches (25.6 x 15.5 mm)
Uploaded:
June 02, 2015
Shared:
June 15, 2015
Total Price:
$3.05
Use these boards to recycle the MPU6050 gyro off your old / broken flight controllers. I pull them off broken toy grade all-in-one integrated controllers mostly. In the end you only save a few bucks but I hate seeing good parts go in the bin cause I dont have use for the board as a whole.
Note this is a 3v3 board only, DO NOT apply 5V or you WILL kill the gyro, it’s a 3.6v max iC and the common GY-521 breakout has an on board regulator, again this one DOES NOT and only takes 3.3V in! This is prrety much the sparkfun board but with the addition of a indicator LED.
Please see pic’s and description in my RCGroup Blog Post below: http://www.rcgroups.com/forums/showthread.php?t=2438079#post31901300
Use these boards to recycle the MPU6050 gyro off your old / broken flight controllers. I pull them off broken toy grade all-in-one integrated controllers mostly. In the end you only save a few bucks but I hate seeing good parts go in the bin cause I dont have use for the board as a whole.
Note this is a 3v3 board only, DO NOT apply 5V or you WILL kill the gyro, it’s a 3.6v max iC and the common GY-521 breakout has an on board regulator, again this one DOES NOT and only takes 3.3V in! This is prrety much the sparkfun board but with the addition of a indicator LED.
Please see pic’s and description in my RCGroup Blog Post below: http://www.rcgroups.com/forums/showthread.php?t=2438079#post31901300
