SI705x/702x/7006 Minimal Board
author: NStorm
2 layer board of 0.51 x 0.47 inches (13.0 x 11.9 mm)
Uploaded:
November 02, 2016
Shared:
December 10, 2020
Total Price:
$1.15
Minimal breakout board for Silicon Labs SI705x/SI702x/Si7006 I2C temperature / temperature + humidity sensors.
This board does not includes any sort of voltage regulator. Make sure to supply correct Vcc (1.9 to 3.6 V) for this board. Connecting directly to 5V MCU (like Arduino without 3.3 V voltage regulators) will burn this sensor. This is a minimal circuit from “Typical Application Circuit” section from the datasheet.
Parts list (BOM):
R1-R2: Resistor, 10 k, ±5%, 1/16 W, 0603 C1: Capacitor, 0.1 μF, 16 V, X7R, 0603 U1: Si705x/702x/7006 sensor, DFN6.
Tested to work with Si7051 high accuracy temperature sensor, reading data with Arduino.
Minimal breakout board for Silicon Labs SI705x/SI702x/Si7006 I2C temperature / temperature + humidity sensors.
This board does not includes any sort of voltage regulator. Make sure to supply correct Vcc (1.9 to 3.6 V) for this board. Connecting directly to 5V MCU (like Arduino without 3.3 V voltage regulators) will burn this sensor. This is a minimal circuit from “Typical Application Circuit” section from the datasheet.
Parts list (BOM):
R1-R2: Resistor, 10 k, ±5%, 1/16 W, 0603 C1: Capacitor, 0.1 μF, 16 V, X7R, 0603 U1: Si705x/702x/7006 sensor, DFN6.
Tested to work with Si7051 high accuracy temperature sensor, reading data with Arduino.
