2 layer board of 0.60 x 0.60 inches (15.2 x 15.2 mm)
Uploaded:
October 23rd 2014
Shared:
October 23rd 2014
Total Price:
$1.75
Open source direct driver LED driver populated with most parts off a standard 105c. See post #1360 in this thread (ht…
Open source direct driver LED driver populated with most parts off a standard 105c. See post #1360 in this thread (http://budgetlightforum.com/node/29562)
D1 is SOT-323
C1 is 10uf 0805 X7R
OTC is 0805 (1uf for off-time based FW)
R1 & R2 is the voltage divider (0805’s)
D1 = SOD-323 (pad is R3 0805 if zener modded)
Z1 is SOD-123 4.3v zener (only populate if needed)
FET is SOT-23-3 (such as AO3400A or IRLML2502)
Open source direct driver LED driver populated with most parts off a standard 105c. See post #1360 in this thread (ht…
Open source direct driver LED driver populated with most parts off a standard 105c. See post #1360 in this thread (http://budgetlightforum.com/node/29562)
D1 is SOT-323
C1 is 10uf 0805 X7R
OTC is 0805 (1uf for off-time based FW)
R1 & R2 is the voltage divider (0805’s)
D1 = SOD-323 (pad is R3 0805 if zener modded)
Z1 is SOD-123 4.3v zener (only populate if needed)
Hey there! Before ordering, make sure you have all all the info you need to complete and use this design.
This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended.
OSH Park cannot place any guarantees about the functionality or correctness of the design.
