ItsyBitsy M4 Charger Backpack
author: CedarGrove
2 layer board of 2.01 x 0.90 inches (51.0 x 22.9 mm)
Uploaded:
May 16, 2023
Shared:
June 01, 2023
Total Price:
$9.05
The ItsyBitsy M4 Charger Backpack is an Adafruit ItsyBitsy M4 Express-compatible piggyback module that converts the 3-sided pinout of the ItsyBitsy to dual in-line for use on typical solderless breadboards and soldered protoboards. The adapter was also designed with extra solderable pin connections.
Included is a STEMMA-QT connector that can be optionally configured via solder jumpers to connect to the ItsyBitsy’s UART (RX/TX) or I2C (SCL/SDA) signals. A 2-pin JST LiPo battery connection is on-board that supports charging (100mA charge rate), compatible with Adafruit’s standard battery connector polarity.
The ItsyBitsy M4 Charger Backpack is an Adafruit ItsyBitsy M4 Express-compatible piggyback module that converts the 3-sided pinout of the ItsyBitsy to dual in-line for use on typical solderless breadboards and soldered protoboards. The adapter was also designed with extra solderable pin connections.
Included is a STEMMA-QT connector that can be optionally configured via solder jumpers to connect to the ItsyBitsy’s UART (RX/TX) or I2C (SCL/SDA) signals. A 2-pin JST LiPo battery connection is on-board that supports charging (100mA charge rate), compatible with Adafruit’s standard battery connector polarity.
