12v-booster-1.2.1
author: aaronw
2 layer board of 0.87 x 0.41 inches (22.1 x 10.5 mm)
Uploaded:
October 22, 2018
Shared:
October 22, 2018
Total Price:
$1.80
3.5-8V to 12V booster that outputs up to 400mA in a tiny package. This board will fit on your fingertip! Latest revision switches one ground output to +12 so there are two +12V pins, one ground pin and one FET ground pin now. BOM in link and all parts are available from Digikey. This isn’t too difficult to build if you use a solder stencil (I used oshstencils.com). Note that this board needs a load or the voltage will spike.
https://github.com/aaronw2/12v-Boost-Fan-Control
3.5-8V to 12V booster that outputs up to 400mA in a tiny package. This board will fit on your fingertip! Latest revision switches one ground output to +12 so there are two +12V pins, one ground pin and one FET ground pin now. BOM in link and all parts are available from Digikey. This isn’t too difficult to build if you use a solder stencil (I used oshstencils.com). Note that this board needs a load or the voltage will spike.
https://github.com/aaronw2/12v-Boost-Fan-Control
