Wearable Pocketometer Shoe
author: kwan3217
2 layer board of 0.80 x 0.90 inches (20.4 x 22.9 mm)
Uploaded:
August 27, 2020
Shared:
September 01, 2020
Total Price:
$3.60
Wearable sensor set appropriate for recording motion on such things as a roller coaster. This board goes in your shoe, and hosts a set of inertial, magnetic, and pressure sensors. The other boards go in your pocket and on your shoulder.
The intended purpose of the wearable pocketometer is measuring roller coasters, and the shoe one may be the most useful one for measuring a roller coaster cleanly. Since it is in your shoe, you can jam your foot up against some corner of the roller coaster car, to get good rigid contact with the car and good repeatability.
Each board hosts two LSM6DS0 6-axis inertial sensors, an AK09970 3-axis magnetic sensor, and a BME180 pressure sensor.
All design files are at https://github.com/kwan3217/kicad/tree/master/WearablePocketometer. BOM is derivable from the schematic, all parts have Digikey part numbers.
Wearable sensor set appropriate for recording motion on such things as a roller coaster. This board goes in your shoe, and hosts a set of inertial, magnetic, and pressure sensors. The other boards go in your pocket and on your shoulder.
The intended purpose of the wearable pocketometer is measuring roller coasters, and the shoe one may be the most useful one for measuring a roller coaster cleanly. Since it is in your shoe, you can jam your foot up against some corner of the roller coaster car, to get good rigid contact with the car and good repeatability.
Each board hosts two LSM6DS0 6-axis inertial sensors, an AK09970 3-axis magnetic sensor, and a BME180 pressure sensor.
All design files are at https://github.com/kwan3217/kicad/tree/master/WearablePocketometer. BOM is derivable from the schematic, all parts have Digikey part numbers.
