GBA Cartridge RePCB (AGB-E05-01)
author: retrosix
2 layer board of 2.01 x 1.21 inches (51.0 x 30.8 mm)
Uploaded:
October 13, 2024
Shared:
October 13, 2024
Total Price:
$12.15
The most accurate reproduction of the AGB-E05-01 Game Boy Advance Cartridge PCB, without any restrictions.
Highly accurate traces, copper pours, masks and silkscreens/
Overlaying the original PCB you cannot tell a difference in any aspect, so a perfect replacement.
The PCB should be 0.8mm thick.
Finish can be 1oz ENIG, however it is better if you ask for Hard Gold (used when there are gold edge connectors to make them more durable).
The solder resist should be PANTONE 556 C if possible (that will give close to original green color). If not choose any color solder resist you want.
Silkscreen is white.
Source https://github.com/angelsix/retrosix-resources/tree/main/
The most accurate reproduction of the AGB-E05-01 Game Boy Advance Cartridge PCB, without any restrictions.
Highly accurate traces, copper pours, masks and silkscreens/
Overlaying the original PCB you cannot tell a difference in any aspect, so a perfect replacement.
The PCB should be 0.8mm thick.
Finish can be 1oz ENIG, however it is better if you ask for Hard Gold (used when there are gold edge connectors to make them more durable).
The solder resist should be PANTONE 556 C if possible (that will give close to original green color). If not choose any color solder resist you want.
Silkscreen is white.
Source https://github.com/angelsix/retrosix-resources/tree/main/
