I²C Motor MOSFET Controller v0.3.1-pi
By pixnbits-hardware
2 layer board of 2.56 x 1.18 inches (64.9 x 30.0 mm).
Shared on December 3rd, 2017 05:30
Control the Gates of 16 MOSFETs of common GND and VCC via I²C. Designed as a Raspberry Pi hat. I²C address via DIP switches. TODO: add BoM 😓
4 pairs of 2P/2N channel, for H-bridges.
MOSFET GND and VCC used for Gate differential signals but not connected to Source on board to not limit current capacity.
I2C-Hbridge-hat but I need to look at licenses of libraries used to make sure I can make it public 😌
I²C Motor MOSFET Controller v0.3.1-pi
By pixnbits-hardware
2 layer board of 2.56 x 1.18 inches (64.9 x 30.0 mm).
Shared on December 3rd, 2017 05:30
Control the Gates of 16 MOSFETs of common GND and VCC via I²C. Designed as a Raspberry Pi hat. I²C address via DIP switches. TODO: add BoM 😓
4 pairs of 2P/2N channel, for H-bridges.
MOSFET GND and VCC used for Gate differential signals but not connected to Source on board to not limit current capacity.
I2C-Hbridge-hat but I need to look at licenses of libraries used to make sure I can make it public 😌
