36VM-PWM010219
author: MosMaxElectronics
4 layer board of 2.76 x 0.79 inches (70.2 x 20.1 mm)
Uploaded:
January 02, 2019
Shared:
October 06, 2019
Total Price:
$21.90
Brought to you by http://MosMax.com
https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=d2804d4d6a
https://docs.google.com/spreadsheets/d/1hWjVyz7kOyig8Tc2O5w9dPft8KiQWIKVWpvrzCr8sQA/edit?usp=sharing
3 wire VM (connect both the red & white wire to the VM+ pad) - https://www.ebay.com/itm/1pc-Red-Digital-3-Wire-36-LED-Voltmeter-NEW-Model-RR-DIY-Bus-Applications-6r/312136442312
2 wire VM - https://www.ebay.com/itm/2-wire-2-5-30V-36-Red-LED-voltmeter/131793742284/
Fits 250C enclosures
Use with 2S/8.4V or 3S/12.6V battery configurations only
When switched on, VM will display battery voltage. VM will NOT display output voltage (well at max duty cycle, battery voltage & output voltage should be nearly the same)
LED will light when firing
Wire board as labeled. Off board, wire battery positive contact to 510 positive pin with 12-16g stranded silicone insulated wire.
An off board fire switch (optional) can be wire to the pads labeled F1 & F2. S2 can be omitted or remain on the board, your choice, if using an off board fire switch.
USE OF OFF BOARD OVER CURRENT PROTECTION CIRCUITRY/COMPONENTS HIGHLY RECOMMENDED
Corners of VM cutout will have radii, you’ll need to slightly file them to square (WEAR A DUST MASK)
Brought to you by http://MosMax.com
https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=d2804d4d6a
https://docs.google.com/spreadsheets/d/1hWjVyz7kOyig8Tc2O5w9dPft8KiQWIKVWpvrzCr8sQA/edit?usp=sharing
3 wire VM (connect both the red & white wire to the VM+ pad) - https://www.ebay.com/itm/1pc-Red-Digital-3-Wire-36-LED-Voltmeter-NEW-Model-RR-DIY-Bus-Applications-6r/312136442312
2 wire VM - https://www.ebay.com/itm/2-wire-2-5-30V-36-Red-LED-voltmeter/131793742284/
Fits 250C enclosures
Use with 2S/8.4V or 3S/12.6V battery configurations only
When switched on, VM will display battery voltage. VM will NOT display output voltage (well at max duty cycle, battery voltage & output voltage should be nearly the same)
LED will light when firing
Wire board as labeled. Off board, wire battery positive contact to 510 positive pin with 12-16g stranded silicone insulated wire.
An off board fire switch (optional) can be wire to the pads labeled F1 & F2. S2 can be omitted or remain on the board, your choice, if using an off board fire switch.
USE OF OFF BOARD OVER CURRENT PROTECTION CIRCUITRY/COMPONENTS HIGHLY RECOMMENDED
Corners of VM cutout will have radii, you’ll need to slightly file them to square (WEAR A DUST MASK)