JTAG-10 adapter

author: jwilly
Top
Bottom

2 layer board of 0.75 x 0.65 inches (19.0 x 16.5 mm)
Uploaded: June 17, 2022
Shared: March 12, 2025
Total Price: $2.40

Needs to be adjusted, as the 14pin is backwards. Thanks, TI!

MSP-FET 14pin JTAG to 10pin adapter board. Requires just two connectors: SFH11-PBPC-D07-RA-BK and 20021521-00010T1LF. This is mostly 1:1 pinning, but for RST# pin11 on MSP-FET is routed to pin 10 on smaller connector. Also includes sideband signal testpoints.

Needs to be adjusted, as the 14pin is backwards. Thanks, TI!

MSP-FET 14pin JTAG to 10pin adapter board. Requires just two connectors: SFH11-PBPC-D07-RA-BK and 20021521-00010T1LF. This is mostly 1:1 pinning, but for RST# pin11 on MSP-FET is routed to pin 10 on smaller connector. Also includes sideband signal testpoints.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy