BitsyLED Board v1.1
author: FLYANDI
2 layer board of 0.67 x 0.67 inches (17.0 x 17.0 mm)
Uploaded:
April 22, 2019
Shared:
April 22, 2019
Total Price:
$2.20
BitsyLED is a minimal firmware to drive RGB LED’s (WS2811, WS2812, NeoPixels, etc). It’s designed for anything RC but also can be used for other projects including Christmas lights, Lego’s, or even your real car.
This is the BitsyLED board - a small board powering an ATTINY84 that exposes 3 channels on a common RC signal layout (GND, 5V, DATA). The board itself can fit up to 5 range configurations each having 3 strands with 10 Led’s / strand.
Parts needed (Digikey.com): - ATTINY84 (Part ATTINY84A-SSURCT-ND) - Capacitor in 805 packaging (587-1304-1-ND) - Diode in SOD-123 packaging (MMSZ5242B-TPMSCT-ND)
More info at https://github.com/flyandi/BitsyLED
BitsyLED is a minimal firmware to drive RGB LED’s (WS2811, WS2812, NeoPixels, etc). It’s designed for anything RC but also can be used for other projects including Christmas lights, Lego’s, or even your real car.
This is the BitsyLED board - a small board powering an ATTINY84 that exposes 3 channels on a common RC signal layout (GND, 5V, DATA). The board itself can fit up to 5 range configurations each having 3 strands with 10 Led’s / strand.
Parts needed (Digikey.com): - ATTINY84 (Part ATTINY84A-SSURCT-ND) - Capacitor in 805 packaging (587-1304-1-ND) - Diode in SOD-123 packaging (MMSZ5242B-TPMSCT-ND)
More info at https://github.com/flyandi/BitsyLED
