LP5810 Breakout V1.1
author: MorganS
2 layer board of 0.80 x 0.50 inches (20.3 x 12.7 mm)
Uploaded:
October 04, 2024
Shared:
December 12, 2024
Total Price:
$2.00
Breadboard compatible breakout for LP5810 PWM LED driver.
I2C control for up to 4 outputs in a tiny package!
D0-D3 can be any LED in 0603 size or you can substitute 0603 resistors as pullups to use this as a general-purpose PWM driver. C1 should be 0.1uF. J1 (not labelled on PCB) is a QWIIC connector for the popular I2C interconnect system.
This can be hand soldered without a stencil. If you need a soldering challenge, try the BGA version of this PCB which can be soldered on a hotplate or maybe even with hot air.
Breadboard compatible breakout for LP5810 PWM LED driver.
I2C control for up to 4 outputs in a tiny package!
D0-D3 can be any LED in 0603 size or you can substitute 0603 resistors as pullups to use this as a general-purpose PWM driver. C1 should be 0.1uF. J1 (not labelled on PCB) is a QWIIC connector for the popular I2C interconnect system.
This can be hand soldered without a stencil. If you need a soldering challenge, try the BGA version of this PCB which can be soldered on a hotplate or maybe even with hot air.
