BlueSaab v3.3

author: Edison517
Top
Bottom

2 layer board of 2.36 x 2.44 inches (60.0 x 62.0 mm)
Uploaded: February 11, 2016
Shared: February 11, 2016
Total Price: $28.75

Added additional bottom silk screen labels to RN52. MINOR tweak to BT1 and BT2 vias. Added Hardware Rev resistor R13 with R14 (resistor divider network) for possible future use. Added R15 & C10 for outputting pwm power signal to PWREN pin on RN52. Added SMD jumper to short GPIO7 to ground to force 9600 baud instead of 115200.

Added additional bottom silk screen labels to RN52. MINOR tweak to BT1 and BT2 vias. Added Hardware Rev resistor R13 with R14 (resistor divider network) for possible future use. Added R15 & C10 for outputting pwm power signal to PWREN pin on RN52. Added SMD jumper to short GPIO7 to ground to force 9600 baud instead of 115200.

Top
Bottom
  • Actions

      Ordering shared project

      Hey there! Before ordering, make sure you have all the info you need to complete and use this design. This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
      Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended. OSH Park cannot place any guarantees about the functionality or correctness of the design.
      Order Board
    • Order Board
    • Download
    • Permalink
    • Embed link
Embeddable link to order this shared Project
Whaleshark white
© Copyright 2025 OSH Park, LLC | Privacy