OptoCouplerEval
author: misaz
2 layer board of 0.30 x 0.70 inches (7.6 x 17.8 mm)
Uploaded:
February 02, 2022
Shared:
April 30, 2022
Total Price:
$1.05
Simple breadboard compatible board allowing evaluating SMD optocouplers. While it was designed for use with Renesas RV1S9060A, it can be used with any other optocoupler in compatible package.
BOM
| RD | Package | Value | Description |
|---|---|---|---|
| IC1 | LSO5 | RV1S9060A | Target optocupler |
| C1 | 0603 | 100nF | Decoupling capacitor between VCC and GND on output side of optocoupler. |
| R1 | 0603 | 150ohm | ResiStor for reducing current flowing by optocoupler LED. Exact value depend on input voltage. 150ohm works for 3.3V and 5V logic. |
| Pinhead 1x2 | Standard 2.54mm pin header. | ||
| Pinhead 1x3 | Standard 2.54mm pin header. |
Simple breadboard compatible board allowing evaluating SMD optocouplers. While it was designed for use with Renesas RV1S9060A, it can be used with any other optocoupler in compatible package.
BOM
| RD | Package | Value | Description |
|---|---|---|---|
| IC1 | LSO5 | RV1S9060A | Target optocupler |
| C1 | 0603 | 100nF | Decoupling capacitor between VCC and GND on output side of optocoupler. |
| R1 | 0603 | 150ohm | ResiStor for reducing current flowing by optocoupler LED. Exact value depend on input voltage. 150ohm works for 3.3V and 5V logic. |
| Pinhead 1x2 | Standard 2.54mm pin header. | ||
| Pinhead 1x3 | Standard 2.54mm pin header. |
