Single-key PCB for an RGB 6025 LED
author: Construc_
2 layer board of 0.76 x 0.76 inches (19.3 x 19.3 mm)
Uploaded:
June 29, 2019
Shared:
June 29, 2019
Total Price:
$2.85
Made for Drashna (drashna#9334) on Discord. -RGB LED is a 6025. OSH Park doesnt officially support internal cutouts, so I’ve cut slots along each side. You’ll need a small pair of shears and a file to cut it out. Hopefully the pads line up, I couldn’t find any decent datasheets for the 6025 LED. -Diode is a 2010 (5025 Metric) 1.52x2.65mm hand-solder SMD. Direction is from SWIN to SWO (SWitch IN to SWitch Out). -VDD is common anode/cathode for the LED (I can never remember which, and it doesnt matter so long as you get it right). -B, R, and G are the LED pins for Blue, Red, and Green. -SWIN and SWO are duplicated on either side of the PCB to make soldering them in chains a little bit cleaner. just connect them side-to-side and top-to-bottom with small wires and they’ll chain together. Any questions, feel free to DM me on Discord @ Construc_#6969
Made for Drashna (drashna#9334) on Discord. -RGB LED is a 6025. OSH Park doesnt officially support internal cutouts, so I’ve cut slots along each side. You’ll need a small pair of shears and a file to cut it out. Hopefully the pads line up, I couldn’t find any decent datasheets for the 6025 LED. -Diode is a 2010 (5025 Metric) 1.52x2.65mm hand-solder SMD. Direction is from SWIN to SWO (SWitch IN to SWitch Out). -VDD is common anode/cathode for the LED (I can never remember which, and it doesnt matter so long as you get it right). -B, R, and G are the LED pins for Blue, Red, and Green. -SWIN and SWO are duplicated on either side of the PCB to make soldering them in chains a little bit cleaner. just connect them side-to-side and top-to-bottom with small wires and they’ll chain together. Any questions, feel free to DM me on Discord @ Construc_#6969
