Flux Capacitor v4.1 10 LED version
author: SwedishVaper
2 layer board of 0.76 x 0.91 inches (19.2 x 23.0 mm)
Uploaded:
November 09, 2016
Shared:
December 06, 2016
Total Price:
$3.40
TESTED AND WORKING
(Support will only be offered on projects marked “TESTED AND WORKING”, and only on the moxbods facebook group.
Any previous projects that are now deleted are used at your own risk.)
Parts required are printed on the pcb.
Requires 8v min. to run. can take up to a maximum of 16v. Made for 3S really.
0603 LED’s (neg towards white lines), 0603 resistors and caps, and soic-8 555 and a 4017 soic-16 IC also required as well as a 10K pot.
TESTED AND WORKING
(Support will only be offered on projects marked “TESTED AND WORKING”, and only on the moxbods facebook group.
Any previous projects that are now deleted are used at your own risk.)
Parts required are printed on the pcb.
Requires 8v min. to run. can take up to a maximum of 16v. Made for 3S really.
0603 LED’s (neg towards white lines), 0603 resistors and caps, and soic-8 555 and a 4017 soic-16 IC also required as well as a 10K pot.
