odyssey2-composite-rev1.brd
author: grips03
2 layer board of 0.86 x 0.57 inches (21.8 x 14.4 mm)
Uploaded:
January 21, 2017
Shared:
February 03, 2017
Total Price:
$2.40
PCB to add Composite Video to Odyssey 2 console.
Please don’t make to sell on eBay, etc. This is for non-commercial use only.
Parts list:
CT6EP102 (1K pot)
BC558B
BC548C
680 ohm .25 watt resistor
220 ohm .25 watt resistor
100nf cap
You adjust 1K POT on this PCB and R4 (on the O2 system board) until you are happy with output. Default setting is 400ohms.
Video in = junction of C44 and R7 on system board GND = Ground +5v = easy enough to find with multimeter Audio in = junction of C45 and R49 on system board
Put RCA jacks on the lower left hand side of the bottom shell. This way they are out of way of system board and voice module.
PCB to add Composite Video to Odyssey 2 console.
Please don’t make to sell on eBay, etc. This is for non-commercial use only.
Parts list:
CT6EP102 (1K pot)
BC558B
BC548C
680 ohm .25 watt resistor
220 ohm .25 watt resistor
100nf cap
You adjust 1K POT on this PCB and R4 (on the O2 system board) until you are happy with output. Default setting is 400ohms.
Video in = junction of C44 and R7 on system board GND = Ground +5v = easy enough to find with multimeter Audio in = junction of C45 and R49 on system board
Put RCA jacks on the lower left hand side of the bottom shell. This way they are out of way of system board and voice module.
