17mm TA driver with less vias
author: Texas_Ace
2 layer board of 0.68 x 0.68 inches (17.2 x 17.2 mm)
Uploaded:
July 16, 2017
Shared:
July 16, 2017
Total Price:
$2.25
This is the same as the normal 17mm TA driver but with less vias under the FET. This makes a short less likely when soldering on the ground wire for the LED but also increases resistance a bit. Both will work just fine and are exactly the same in every other way.
This is the same as the normal 17mm TA driver but with less vias under the FET. This makes a short less likely when soldering on the ground wire for the LED but also increases resistance a bit. Both will work just fine and are exactly the same in every other way.
