MCS-5A_LevelerController
author: RVProject
2 layer board of 1.95 x 1.65 inches (49.4 x 41.9 mm)
Uploaded:
May 21, 2022
Shared:
June 13, 2022
Total Price:
$16.05
This switch uses an ATTiny85 micro-processor to control the on and off cycle of a LevelMatePro, Kohree RV Leveler, and Rhino Storm Leveler Pro bluetooth enabled levelers. It requires a trigger, which can be any 12v source, including the Backup pin of the trailer’s 7-pin connector, or any other pin such as the right-left turn or tail lights. It can also use a 433 Mhz wireless relay for remote operation. Simply, if it is 12V, it will trigger the Leveler Controller.
The controller outputs 3.3VDC for use by the levelers. However, due to the flexibility of the controller, any source from 3.3V to 12V can be used for the output power supply. That means you could use this controller to turn on a backup camera for example.
See www.rv-project.com/tips/level2.php for bill of materials and construction documents.
This switch uses an ATTiny85 micro-processor to control the on and off cycle of a LevelMatePro, Kohree RV Leveler, and Rhino Storm Leveler Pro bluetooth enabled levelers. It requires a trigger, which can be any 12v source, including the Backup pin of the trailer’s 7-pin connector, or any other pin such as the right-left turn or tail lights. It can also use a 433 Mhz wireless relay for remote operation. Simply, if it is 12V, it will trigger the Leveler Controller.
The controller outputs 3.3VDC for use by the levelers. However, due to the flexibility of the controller, any source from 3.3V to 12V can be used for the output power supply. That means you could use this controller to turn on a backup camera for example.
See www.rv-project.com/tips/level2.php for bill of materials and construction documents.
