RPi PWM Level Shifter Hat
author: jer
2 layer board of 2.56 x 2.23 inches (65.1 x 56.6 mm)
Uploaded:
July 23, 2016
Shared:
August 14, 2016
Total Price:
$28.55
Raspberry Pi Level Shifter Hat for driving WS2812/SK6812 LEDs.
Parts Required: - 1 TX0104 (TSSOP14) - 2 10uF (SMD 1206) Capacitors - 2 0.1uF (SMD 0603) Capacitors - 1 Schottkey Diode (SMD 1206) - 1 2A Fuse (SMD 1206) - 1 100mil Raspberry Pi GPIO Female Header
For more information, please see: https://github.com/jgarff/rpi_ws281x
Please note, when not powering the PI from the HAT, remove F1. If powering the Pi from the hat, be sure to only use a 5V regulated power supply with enough current capacity. This hat does NOT protect against over-voltage on externally connected supplies!
Use at your own risk. I take no responsibility for any damage or injury. This board has been tested and is known to work on Raspberry Pi B+ and later revisions.
Raspberry Pi Level Shifter Hat for driving WS2812/SK6812 LEDs.
Parts Required: - 1 TX0104 (TSSOP14) - 2 10uF (SMD 1206) Capacitors - 2 0.1uF (SMD 0603) Capacitors - 1 Schottkey Diode (SMD 1206) - 1 2A Fuse (SMD 1206) - 1 100mil Raspberry Pi GPIO Female Header
For more information, please see: https://github.com/jgarff/rpi_ws281x
Please note, when not powering the PI from the HAT, remove F1. If powering the Pi from the hat, be sure to only use a 5V regulated power supply with enough current capacity. This hat does NOT protect against over-voltage on externally connected supplies!
Use at your own risk. I take no responsibility for any damage or injury. This board has been tested and is known to work on Raspberry Pi B+ and later revisions.
