Hall_effect_sensor_board_A139x Single
author: millerlp
2 layer board of 0.25 x 0.41 inches (6.4 x 10.4 mm)
Uploaded:
January 30, 2023
Shared:
June 05, 2023
Total Price:
$0.50
The little board used to hold the Hall effect sensor chip and attach the data cable that goes to the separate data logger. This part gets encased in heat shrink and then glued to the shell of the critter. One of these is needed per animal. The footprint is designed for an Allegro A1395 (or A1393 or A1391) Hall effect sensor chip, along with a 10k ohm resistor and 0.1uF capacitor, both in 0603 size.
The little board used to hold the Hall effect sensor chip and attach the data cable that goes to the separate data logger. This part gets encased in heat shrink and then glued to the shell of the critter. One of these is needed per animal. The footprint is designed for an Allegro A1395 (or A1393 or A1391) Hall effect sensor chip, along with a 10k ohm resistor and 0.1uF capacitor, both in 0603 size.
