2 layer board of 0.65 x 1.28 inches (16.6 x 32.5 mm)
Uploaded:
February 11th 2020
Shared:
August 6th 2020
Total Price:
$4.15
v1: fixes 1x5 header spacing, were previously 100mil too far apart for the N9600A2 board
C1 is the only required e…
v1: fixes 1x5 header spacing, were previously 100mil too far apart for the N9600A2 board
C1 is the only required external component and its value is not critical. 10-100nF should work. R1, R2, RX, TX are all optional components for blinky lights
v1: fixes 1x5 header spacing, were previously 100mil too far apart for the N9600A2 board
C1 is the only required e…
v1: fixes 1x5 header spacing, were previously 100mil too far apart for the N9600A2 board
C1 is the only required external component and its value is not critical. 10-100nF should work. R1, R2, RX, TX are all optional components for blinky lights
Hey there! Before ordering, make sure you have all all the info you need to complete and use this design.
This usually means a component list, and sometimes additional information such as assembly notes, source code, or usage guides.
Since this is a project designed by a community member, it may contain design errors that prevent it from working as intended.
OSH Park cannot place any guarantees about the functionality or correctness of the design.