Linear BEC
author: hofftari
2 layer board of 0.62 x 1.67 inches (15.8 x 42.5 mm)
Uploaded:
January 15, 2015
Shared:
February 04, 2015
Total Price:
$5.20
Simple voltage regulator circuit to be used with a 1085 device and act as a linear BEC for an RC system.
BOM:
One 1085 model low drop voltage regulator (I.e LD1085 with a 5V output voltage), TO-220
Two 10uF Tantalum surface mount capacitors, ~25V max voltage
The backside has no solder mask so you can attach a heat sink as this device will get pretty warm on higher amperages. There are some decent 16x16mm heat sinks that can be bought through Ebay if one wishes.
Simple voltage regulator circuit to be used with a 1085 device and act as a linear BEC for an RC system.
BOM:
One 1085 model low drop voltage regulator (I.e LD1085 with a 5V output voltage), TO-220
Two 10uF Tantalum surface mount capacitors, ~25V max voltage
The backside has no solder mask so you can attach a heat sink as this device will get pretty warm on higher amperages. There are some decent 16x16mm heat sinks that can be bought through Ebay if one wishes.
