Shared Projects by steve-t

Eastbots DIO tester/breakout board, 2019 season revision.

based on previous diobd design: Tester and breakout for FRC and similar digital I/O. The 3-pin 1x3 headers each carry Ground, +5v, and Signal, in that order. Build it as a tester, with male and female horizontal socket and header strips. Or omit the male headers, and directly solder in the wires from a limit switch or break-beam sensor. Designed by FRC team 4795.

this rev add silkscreen identifying the three signal pins, and some #2 mounting holes. Silk on the back identifies this as being designed (and potentially fabricated) during the 2019 FRC season.

Tester and breakout for FRC and similar digital I/O. The 3-pin 1x3 headers each carry Ground, +5v, and Signal, in that order. Build it as a tester, with male and female horizontal socket and header strips. Or omit the male headers, and directly solder in the wires from a limit switch or break-beam sensor. Designed by FRC team 4795.

Power distribution board with ATM fuse holders and powerpole connectors.

F1-F4 fuseholder: keystone 3568 (36-3568-ND) for mini-ATC fuse

J1-J4: pair of anderson powerpole connectors with short bare wires, or pcb tab pins

D1-D4: red LED lights when fuse is blown or missing

D5: green power LED