UM6650C_rev2
2 layer board of 0.83 x 1.11 inches (21.0 x 28.2 mm)
Uploaded:
July 30th 2021
Shared:
July 30th 2021
Total Price:
$4.55
Updated UM6650C so you don't need to solder wire from /WE signal to VCC or GND, just close solder pad 1-2 to disable writing and 2-3 to enable writing.
BOM is same as previous version.
Updated UM6650C so you don't need to solder wire from /WE signal to VCC or GND, just close solder pad 1-2 to disable writing and 2-3 to enable writing.
BOM is same as previous version.
acan_multitap
2 layer board of 3.94 x 2.68 inches (100.1 x 68.1 mm)
Uploaded:
July 30th 2021
Shared:
July 30th 2021
Total Price:
$52.85
Super Acan Multitap - for 4 players
BOM
C1 - C6: 0.1uF 50V MLCC (0805 package)
C7: 22uF 25V capacitor
R1 - R4: 10K Ohm resistor (0805 package)
U1: 74HC00
U6: 74HC02
U5: 74HC125
U4: 74HC139
U2 - U3: 74HC161
JST-PH 9pin male connector (You can also solder wire directly…
Show full description
Super Acan Multitap - for 4 players
BOM
C1 - C6: 0.1uF 50V MLCC (0805 package)
C7: 22uF 25V capacitor
R1 - R4: 10K Ohm resistor (0805 package)
U1: 74HC00
U6: 74HC02
U5: 74HC125
U4: 74HC139
U2 - U3: 74HC161
JST-PH 9pin male connector (You can also solder wire directly…
Show full description
nisetoro_wsc_adapter_v2
2 layer board of 2.84 x 1.91 inches (72.1 x 48.6 mm)
Uploaded:
June 29th 2021
Shared:
June 29th 2021
Total Price:
$27.15
Adapter PCB for nisetro_wsc.
Make sure to choose PCB thickness to 1.0mm when building!
Adapter PCB for nisetro_wsc.
Make sure to choose PCB thickness to 1.0mm when building!
