Shared Projects by pugbutt

Shared Projects by pugbutt

Atmega328P Module, DIP28-Sized, Breadboard Style

2 layer board of 1.40 x 0.70 inches (35.6 x 17.8 mm)
Uploaded: November 22nd 2015
Shared: November 22nd 2015
Total Price: $4.90

Same schematic as before, but ISP connector mirrored so it can come out the silkscreen side of the module, while the other pins come out on the component side. Also, added a reset switch. (Digikey part number EG4918CT-ND.)

The discrete components are 0603.

The crystal is an NDK brand, ty…

Show full description

Same schematic as before, but ISP connector mirrored so it can come out the silkscreen side of the module, while the other pins come out on the component side. Also, added a reset switch. (Digikey part number EG4918CT-ND.)

The discrete components are 0603.

The crystal is an NDK brand, ty…

Show full description

Embeddable link to order this shared Project

ATMega328P Module, DIP28-Sized, Deadbug Style

2 layer board of 1.40 x 0.70 inches (35.6 x 17.8 mm)
Uploaded: November 19th 2015
Shared: November 19th 2015
Total Price: $4.90

The discrete components are 0603.

The crystal is an NDK brand, type NX3225GA.

I'm using a 10MHz one so the board can be powered directly from a lipo cell.

The programming header is laid out so the pins come out on the component side. There's another rev on here where it is mirrored to …

Show full description

The discrete components are 0603.

The crystal is an NDK brand, type NX3225GA.

I'm using a 10MHz one so the board can be powered directly from a lipo cell.

The programming header is laid out so the pins come out on the component side. There's another rev on here where it is mirrored to …

Show full description

Embeddable link to order this shared Project

BME280 breakout

2 layer board of 0.32 x 0.32 inches (8.0 x 8.0 mm)
Uploaded: November 14th 2015
Shared: November 14th 2015
Total Price: $0.45

BOSCH BME-280 Breakout

Temperature/Humidity/Pressure Sensor

The header has 2mm spacing, 0.8mm holes. The caps and resistors are size 0603.

Schematic

BOSCH BME-280 Breakout

Temperature/Humidity/Pressure Sensor

The header has 2mm spacing, 0.8mm holes. The caps and resistors are size 0603.

Schematic

Embeddable link to order this shared Project